Apparel Chain & Sprockets Graphics Handle Bars & Grips Body Plastic & Guards Brakes & Wheels Maico Kawasaki Honda Suzuki Yamaha KTM Other

 

 

Maico

1957 Maico Typhoon - Solvang Vintage Motorcycle Museum

Maico Tank Decals for Red Tank
1975 - 1978

16 mil thick. NEW!
Will not wash off.
Exact Maico Yellow to match original tank color.
$39.95

Maico Air Filter Cage by Twin-Air 1980 - 1981
250-440/490

Great filter cage to replace that plastic warped cage.
$35.00

Maico 1981 - 1982 490 Head Gasket

Brand New Head Gasket
$22.00

Maico Tank Decals for Yellow Tank
1975 - 1978

16 mil thick. NEW! Perfect for that yellow plastic tank that came on the 75-76 models.
$39.95

Maico Swing Arm Bushing Kit
Fits 1978 - 1994

Set of 2 - New! Comes with 2 bearings and 2 bushings. Remanufactured parts. High quality parts for your restoration.
$75.00

Maico Intake Manifold with Clamps - Mikuni

Fits Mikuni.
Not a plumbing tube that fits poorly from Home depot like others are selling. These high quality clamps are identical to the clamps that came on the Maico's. Boot fits tight on both the cylinder and carb and will not slip off. New parts to keep your engine running like new!
$20.00

Maico 1982 250-440-490 Rear Shock Update Bulletins

Maico 82 250-440-490 rear shock update bulletins.
Use these bulletins to eliminate potential shock failure on the 82 shock.
$20.00

Maico 1980 - 1981 250/ 490 Uni Filter

Buy the correct fitting air filter - not something almost the same!
$27.99

Maico Intake Boot Fits 250/400/450/490 1970 - 1982

Maico intake boot fits 1970-82 with Bing or Mikuni carbs.
New part designed to work on the Maico cylinder flange, not a plumbing tube others say is a Maico part.
Clamps are available in another listing in our Maico page.
$15.00

Maico Intake Manifold with Clamps - Bing

Fits Bing.
Not a plumbing tube that fits poorly from Home depot like others are selling. These high quality clamps are identical to the clamps that came on the Maico's. Boot fits tight on both the cylinder and carb and will not slip off. New parts to keep your engine running like new!
$25.00

Maico Points and Condenser Set- Fits 1967 - 1977 Engines

Fits years 1967 - 1977 motors with points ignitions.
$14.95

Maico Compression Release Cable for 1970 - 1986

Correct cable with correct length for a perfect fit. Not a cut up throttle cable sold by others.
This is a replica of the original cable that came on the Maico - Made by Pinsonnault MX.
$16.00

Maico, Husky, Bultaco, Zundapp Bing Carb 36mm
Used - Great Condition

Used but in great condition, slide has scratches on it but is usable as is and came off of a running 250 Maico. Will clean and check over carb before shipping.
$157.95

Maico Gasket / Seal Set Complete For 1969 - 1971 400 Engine

Set includes seal for crank and transmission. All gaskets to do a total rebuild.
$79.00

Maico Primary Chain - 52 Link Renold's OEM Maico

New original primary chain for 78-80 250 Maico engine. A High Quality part at a great price!
$50.00

Maico Airbox Clamp Set 1969 - 1997 250 - 500

The correct size and width clamps for your Maico!
$13.00

Maico 250- 440 Clutch Gasket
Fits 1975 1/2 - 1977

New Gasket! Rebuild your engine using these high quality paper gaskets just like the Maico factory used.
$9.95

Maico, Montesa, Yamaha, Suzuki, Husqvarna Fork Boots - Vintage. Fits 35-38mm Forks

Fits most vintage bikes with 35-38mm forks.
High quality boots at a great price!
$15.00

1970 - 1982 250-400-450-490 Maico Shift Lever

Maico Shift Lever
$25.00

Maico Intake Boot Clamps 250/400/450/490 1970 - 2003

Maico intake boot clamps 1970-2010 with Bing or Mikuni carbs. Set of 2 clamps. New part designed to work on the Maico cylinder intake boot, may also fit other bikes with similar size intake. Clamps are stainless steel and are narrower than regular hose clamps and are rolled at the edges to prevent clamp damage.
$10.00

Maico Mahle Piston for 400 1970 - 1977

Maico Mahle piston for 400 70-77 - new with shelf wear. Piston is new but has shelf wear with scuffs and scratches. Piston has a dent at the skirt which can be fixed, may have been dropped at one time or something banged up against it. Does not have rings, pin and clips. I stock wrist pins and bearings for this piston.
$70.00

Maico Seal Kit for 1978 - 2003

High quality seals at a great price.
We also have the original design crank seals with the double ring.
$25.00

Maico Mikuni Carb 36mm / Airbox Boot / Intake Boot / Cable
Fits 1969 - 1979

36mm Mikuni carb , intake manifold, airbox boot, throttle cable all in 1 kit. Extra main and pilot jets are included. All clamps included. This is not a Maico manufactured part - only a good replacement for the unavailable parts, It is a sturdy boot that will not tear or move.
Airbox boot may have to be trimmed to fit different years.
$220.00

Maico Fender Washers - Rubber Fits 1967 - 1984 New Pack of 10

Perfect for fenders - airbox - side panels.
25mm diameter with 8mm center hole, these are reinforced rubber for durability.
$10.00

Maico 490 Gasket Set
Fits 1981 - 1982 Engines

New Maico 490 gasket set fits 1981-82 engines. New gaskets, complete with exhaust manifold gasket. These gaskets are made to fit the cases without any problems. High quality gasket that is made from paper, just like the Maico factory used.
Rebuild your engine using these high quality paper gaskets.
$67.95

Maico Wrist Pin Bearing - Chromoly 1969 - 1996

New Maico Wrist pin bearing fits all years 1969 - 1996. These fit all engines from 1969 - 1996
250/400/440/490
$16.99

Maico Wrist Pin and Bearing
Fits 1971 - 2003 250/440/490

Specify year when you use check out.
$28.95

Maico 250 - 440-490 Crank Nut Lock Plate
Fits 1975 - 1982 Engines

New part that is more durable and better fitting.
$7.95

 

Maico Cylinder Head
Fits 250 1977 - 1978 - Used

Used but in great condition. No broken fins - all threads are excellent. Needs cleaning and paint and it will look like new. These parts are hard to find in this condition.
$80.00

Maico 250- 440 Ignition Gasket
Fits 1969 - 1977 Engines

New Maico 250 - 440 ignition gasket. Fits 1969 - 1977 engines. New gaskets, not 30 year old parts. These gaskets are made to fit the cases without any problems. High quality gasket that is made from paper, just like the Maico factory used. Rebuild your engine using these high quality paper gaskets.
$8.95

Maico Engine Bearing #513 - Transmission 1972 - 1982. New!

Maico engine bearing #513 - transmission 1972 - 1982
$12.00

Maico 1976 - 1997 250 - 500 Crank Bearing. New!

New! Fits all 1976 - 1997 motors.
Great quality bearing at a great price. Why pay inflated prices? Buy it here and save!
Fits all 1976 - 1997 engines.
$45.00

Maico Rear Spokes 1981 - 1985 #7398 Set of 3. New!

Left long side. New original rear spokes for 1981 - 1985 rear hub.
$20.00

Maico Cylinder Head - 250
F its 1969 - 1972 Square barrel. New!

New Maico cylinder head. 250 - fits 1969 - 1972 square barrel. New part with no cracked or missing fins, has never been used. New parts to keep your engine running like new!
$150.00

Maico Chain Roller Kit. Fits 1967 - 1981 Chain Guides. NEW!

These are not the cheap rubber rollers others are selling, they are made of a harder plastic nylon for longer wear and better fit. Change or replace that worn roller with this high quality part.
Comes with all necessary mounting hardware for the exact fit!
$20.95

Maico, Montesa, KTM, Husky
Fork Boots

Perfect for Maico external spring forks. Fork boots are perfect size for most 1979 - 1989 vintage bikes. Better quality fork boots that last longer. Bottom of boots are vented to relieve air build up. Fits most forks with 40-45mm tubes and are about 14" in length. Bottom of boot is 55mm-60mm.
Comes with zip ties
$34.00

Maico Muffler Circlip 1981 - 1983 250-490. New!

Fits stock mufflers only. Replace the circlip you twisted trying to remove it with a new one. New parts from Maico.
$10.95

Maico 440 Gasket Set. Fits 1978 - 1980 Engines. New!

Maico 440 gasket set fits 1978 - 1980 engines. New gaskets, complete with exhaust manifold gasket. These gaskets are made to fit the cases without any problems. High quality gasket that is made from paper, just like the Maico factory used. Rebuild your engine using these high quality paper gaskets.
$62.95

Maico Cylinder Base Gasket. Fits 1983 - 1996 250 #8223. New!

New Maico Gasket! Fits 1983 - 1996 250. #8223
$10.00

Maico Ohlins Twin Shock Bumpers - New Set of 2

Bottom bumper for Ohlins shocks that the Maico Factory race team used in 1980 - 1981. Same part others sell at inflated prices.
$30.95

Maico Fork Seal. Fits 1968 - 1974-1/2 forks. Set of 2. New!

Correct size - 36mm - not 35mm like others sell. New parts daily for all Maico models!
$15.00

Maico Seal Kit for 1973 - 1975 Radial engine. 250/400/450. New!

New Maico seal kit for 1973 - 1975 Radial engine. 250/400/450. Seal kit includes 2 crank seals, counter shaft seal, shifter seal. New parts to keep your engine running like new!
$25.00

Maico Engine Crank Seals 1969 - 1972

Maico engine crank seals for Square barrel 1969 - 1972. 2 crank seals and outer seal on ignition side.
$20.00

Maico Ignition Coil. Fits 250 / 360 / 400 / 440 / 501 1969 - 1977. New!

Coil may fit other brands like OSSA, Bultaco, Montesa, Husky, and Zundapp.
$28.00

Maico Swing Arm Bushing. Fits 1978 - 1994.
Set of 2. New!

Parts that nobody else has in the states. 2 bushings to replace the worn and rusted bushings. Remanufactured parts to the exact fit as original Maico bushings. High quality parts for that restoration. These are not available from Maico.
$52.00

Maico Oil Seal Part #8175. New! Fits Clutch Arm 1983 - 1996

New Maico Oil Seal #8175.
$7.00

Maico Ignition Crank Seal. Fits Engines 1975 1/2 - 2003. New!

Maico Ignition crank seal fits engines 1975 1/2 - 2003. New! Buy only the seal you need.
$8.00

Maico Clutch Nut for 1985 - 1997 With Water Cooled Engine

Maico clutch nut for 1986 - 1997 with water cooled engine.
$10.00

Maico, Montesa, Yamaha, Suzuki, Husqvarna Fork Boots - Vintage. Fits 35-38mm Forks

Fits most vintage bikes with 35-38mm forks.
High quality boots at a great price!
Boots may have a few discoloration spots from storage over the years.
$15.00

Maico, Montesa, Yamaha, Suzuki, Husqvarna Fork Boots - Vintage. Fits 35-38mm Forks

Fits most vintage bikes with 35-38mm forks.
High quality boots at a great price!
Boots may have a few discoloration spots from storage over the years.
Last pair of pink boots, these are no longer available!
$15.00

Maico Top End Gasket Set. New! Fits 1972 - 1975 450 Engine.

Maico Top end gasket set. New! Fits 1972 - 1975 450 engines. Kit comes with exhaust gasket, head, and base gaskets - enough to do the top end.
$37.99

Maico Top End Gasket Set. New! Fits 1972 - 1975 400 Engine.

Maico Top end gasket set. New! Fits 1972 - 1975 400 engines. Kit comes with exhaust gasket, head, and base gaskets - enough to do the top end.
$37.99

Maico Top End Gasket Set. New! Fits 1972 - 1975 250 Engine.

Maico Top end gasket set. New! Fits 1972 - 1975 250 engines. Kit comes with exhaust gasket, head, and base gaskets - enough to do the top end.
$37.99

Maico Crank Nut #505 - #3240

Maico crank nut #505 - #3240. May also be used for the pinion shaft sprocket on 1969 - 1974 engines.
$14.00

Maico Head Gasket For 250 Engine. Fits 1969 - 1980. Used.

Maico head gasket for 250 motors. Fits 1969 - 1980 motors. Used but in good condition.
$5.00

Maico Head Gasket For 400 Engine. Fits 1969 - 1980. Used.

Maico head gasket for 400 motors. Fits 1969 - 1980 motors. Used but in good condition.
$5.00

Maico Crank Seals For 1975 - 2003 Engines. New!

High Quality Aftermarket Seals!
$18.00

Maico Centercase Gasket. Fits 250 1983 - 1984. New! #8021

Maico Centercase Gasket. Fits 250 1983 - 1984. New! #8021
$10.00

Maico Clutch Cover Screws #1538 35mm Long. New!

Why put cheap allen screws sold by other so called Maico experts on your bike when you can have Original factory hardware? These are a Maico original part, not some allen screw you find at Home Depot. Make your engine look like it came from the Maico Factory with these parts. Fits engines from 1973 - 1982. #1538 35mm
$1.80

Maico Clutch Cover Screws #1542 55mm Long. New!

Why put cheap allen screws sold by other so called Maico experts on your bike when you can have Original factory hardware? These are a Maico original part, not some allen screw you find at Home Depot. Make your engine look like it came from the Maico Factory with these parts. Fits engines from 1973 - 1982. #1542 55mm
$2.00

Maico Gasket Set New! Fits 1972 - 1975 450 Engine

Kit comes with center gasket, clutch cover gasket, ignition cover gasket, exhaust gasket, head and base gaskets, shifter and kicker o-rings.
$59.99

Maico Gasket Set New! Fits 1972 - 1975 250 Engine

Kit comes with center gasket, clutch cover gasket, ignition cover gasket, exhaust gasket, head and base gaskets, shifter and kicker o-rings.
$59.99

Maico Wrist Pin Chromoly 1969 - 1996 New!

These fit all engines from 1969 - 1996
250/400/440/490
$16.99

Maico 250 Gasket Set. Fits 1978 - 1980 Engines. New!

New Maico 250 gasket set fits 78-1980 engines.
New gaskets, complete with exhaust manifold gasket.
These gaskets are made to fit the cases without any problems. High quality gaskets that are made from paper, just like the Maico factory used.
Rebuild your engine using these high quality paper gaskets.
$59.95

Maico Primary Chain 54T #2 for 1969 - 1977 250 Motors. Used.

Maico primary chain 54T Fits 1969 - 1977 250 motors. Used chain in good condition.
$20.00

Maico Tank Decals. Fits 1981 Tanks. New!

These decals are made from thick 18 mil. Same as most shroud decal companies. Exact replica of 1981 graphics with correct Maico red. These are preforated so they stay on the plastic tank longer.
$49.95

Maico Air Filter 1969 - 1979. New!

Fits stock cage better than Twin air filters. Pre oiled ready to install, must use no-toil filter cleaner to clean. We also carry the regular no toil filters that you can use your own oil. High quality dual stage filter. 6 month warranty from No-Toil!
$25.00

Maico Clutch Push Pin. Fits early 1972 - 1974 Models. New!

Part fits early 1973, 1974 with big cover so you can use small clutch.
Parts only a Maico dealer will have!
$38.00

Maico Linkage Bushing # 7857. New! Fits only 1983 Maico's

Part is new and goes in the front part of the linkage that bolts to the swingarm.
$16.00

Maico Linkage Sleeve # 7846. New! 1983

New Maico Linkage bushing # 7846. Fits only 1983 Maico's. Part is new and goes in the front part of the linkage that bolts to the swingarm.
$12.00

Maico Centercase Gasket. Fits 490 1983 - 1984. New! #8021

Maico Centercase Gasket. Fits 490 1983 - 1984. New! #8021
$10.00

Maico Clutch Arm. Fits Square Barrel and AW, Magnum, and Mega Engines. Used.

Maico clutch arm fits square Barrel and AW, Magnum, and Mega engines. Used. Part shows wear on one side. For use on 1973 - 1982 models, but is in perfect condition on the other side for the early Square barrel clutch cover that runs the cable under the motor prior to '72 when they started using the sand cast engine covers. Very rare parts that are no longer available even used. Get that old Maico shifting like it should.
$25.00

Maico Front PBI Sprocket 13T. 1975 - 1982 250-490 New!

Perfect fit! Case hardened steel sprocket by PBI.
$23.99

Maico Front Fender. Fits 1975 - 1978 250/400/440 New!

Very durable fender that will not fold up on impact. Color is a perfect match for the Maico red used in 1977 - 1978.
$59.00

Maico 1982 - 1983 Shock Linkage Heim Bearing. New! #7424

Free original Maico shock service bulletin with purchase. A new original Maico part that is new, not new old stock. Lower shock link bearing to replace the worn bearing. Do not use the solid sleeve and insert from other sellers as the shock needs to move slightly side to side when compressing so it does not bind. Using a solid sleeve and bushing will not let the shock move freely causing the shaft to flex and break. That was one of the issues with the 82-83 bikes, that is why they use the heim bearing. Buy from a real Maico enthusiast. We have these at a lower price than any other seller.
$72.00

Maico T-Shirt Size Large New! Designed by Answer Racing

New Maico T-Shirt size Large. Designed by Answer Racing.
$25.00

Maico Engine Seals 1973 - 1975

Maico engine seals for GP Radial engines 1973 - 1975. 2 crank seals, countershaft seal, and shifter seal to replace the oring.
$20.00

Maico Clutch Cable. Fits 1970 - 1979. New!

High quality cable fits years 1970 - 1979 new case engines.
$42.99

Maico Transmission Hook Ratchet Selector. Fits 1976 - 1977. Used.

Very good to excellent condition part.
$20.00

Maico Gasket / Seal Set Complete. For 1969 - 1971 250 Engine

Set includes seal for crank and transmission - all gaskets to do total rebuild.
$79.00

Maico Shift Pull Arm Fits 1975 - 1977. Used.

Maico shift pull arm. Fits 1975 - 1977. Used but in good condition.
$20.00

Maico MC 250 Ring. Fits Part #2066 67.45mm. New!

Maico 250 cc ring for 1970 - 1980 engine with Mahle piston 67.45mm. Part # 2066 no longer available from Maico.
$65.99

Maico Clutch Hub For Square Barrel Engine. Used.

Maico clutch hub for early Radial or late Square barrel motors. Splines on hub are good.
$25.00

Maico, Montesa, Yamaha, Honda, KTM, Suzuki - Vintage. Fits 35-38mm Forks

Fits most vintage bikes with 35-38mm forks and are approximately 10" in length. Bottom of boots are vented to relieve air build up.
Fork boots are Teal color and have some discoloration spots from being stored for a long time.
$15.99

Maico, Montesa, Yamaha, Honda, KTM, Suzuki Fork Boots - Purple.

Maico, Montesa, Yamaha, Honda, KTM, Suzuki fork boots. Fork boots are purple in color and have some discoloration spots from being stored for a long time. Fork boots are perfect for that vintage restoration. Bottom of boots are vented to relieve air build up. Fits most forks with 35-38mm tubes and are about 10" in length.
$15.99

Maico Rear Brake Pads. Fits 1998 - 2003

Nice pads that last, same as KTM from 1996 - 1999
$32.99

Maico Output Shaft Bearing For Engines 1975 1/2 - 1977. New!

New bearing for that leaking counter shaft. Double seal bearing - high quality at an affordable price!
$27.00

Maico Front Sprocket 1983 - 2003 250/440/490. Ultra lite 13T

New Maico Front sprocket 83-03 250 / 440 / 490 - ultra lite 13 Tooth. High quality part at a great price!
$25.00

Maico Seal Kit For 1976 - 1977 AW Engine. 250/400/450. New!

Seal kit includes 2 crank seals, shifter seal.
$19.95

Maico, Montesa, Yamaha, Honda, KTM Fork Boots

Maico, KTM, Montesa, Yamaha, Honda, fork boots. Fork boots are narrower than other boots so they do not rub tire. Bottom of boots are vented to relieve air build up. Fits most forks with 40-43mm tubes and are about 14" in length. Bottom of boot is 55mm-60mm. Comes with zip ties and hose clamps.
$30.00

Maico Crank Seals For 1975 - 2003 Engines. New!

High quality aftermarket seals.
$18.00

Maico Needle Cage # 8266 Output Shaft 490/500 1983 - 1996

Fits output shaft on 1983 - 1996 engines.
$15.00

Maico Engine Bearings. MX125 1977 - 1979 Engines. New!

Crank bearings for 125 Maico engines - set of 2 bearings.
$25.00

Maico Square Barrel Crank Seals. Fit 1967 - 1972 Engines

Maico Square Barrel crank seals. For 250 / 360 / 400 1967 - 1972 New seals, not old stock.
$18.00

Maico 1982 - 1997 250 Uni Filter. New!

Fits single shock Maico 1982 - 1997. These are new filters, not something that has been sitting for 10 years. High quality filter at a great price!
$29.99

Maico 1975 1/2 - 1977 Mainshaft Bearing. Fits all 250-440. New!

Bearing is made for the bushing on the mainshaft that came in the 1975 1/2 - 1977 motors. Made by Nachi of Japan. Not the cheap chinese bearings others sell at inflated prices. High quality parts for that restoration.
$20.00

Yamaha, Honda, Kawasaki, Suzuki Fork Boots - Royal Blue

Perfect match for 84-87 Honda and 82-88 Suzuki, 85-89 Kawasaki. Fork boots are perfect size for most 79-89 vintage bike forks. Better quality fork boots that last longer and do not dry rot like cheaper Korean made boots. Bottom of boots are vented to relieve air build up. Fits most forks with 40-45mm tubes and are about 14" in length. Bottom of boot is 55mm-60mm. Comes with zip ties.
$34.95

Maico MC 400 Ring Set 77.40
Fits 1978 - 1981. New!

1978 - 1981 Maico 400 Ring Set.
$79.99

Maico Allen Screws Set. Clutch Cover. 1978 - 1982 250 / 490

New parts to be used with the stock copper washers on the clutch cover.
$14.95

Maico, Montesa, Yamaha, Honda, KTM, Suzuki, Husqvarna Fork Boots - Royal Blue

Perfect match for 84-87 Honda and 82-88 Suzuki, 85-89 Kawasaki. Fork boots are perfect size for most 79-89 vintage bike forks. Better quality fork boots that last longer and do not dry rot like cheaper Korean made boots. Bottom of boots are vented to relieve air build up. Fits most forks with 40-45mm tubes and are about 14" in length. Bottom of boot is 55mm-60mm. Comes with zip ties,
$34.95

Maico MC 250 Ring. Fits Part #2064 67.10mm. New!

Maico 250 cc ring for 1970 - 1980 engine with Mahle piston 67.10mm. Part # 2064 is no longer available from Maico.
$65.99

Maico Throttle Cable with Whirlpool Throttle. Fits 1976 - 1986.

Also fits KTM, Honda, Suzuki, Kawasaki, Yamaha. Cable has adjuster and throttle is a 1/4 turn.
$49.95

Maico, Yamaha, Honda XR, KTM, Suzuki DRZ Fork Boots

Great for Maico external springs from 1969 - 1974 and early 80's KTM. Bottom of boots are vented to relieve air build up. Fits most XR Honda and 1999 - 2007 DRZ Suzuki forks. Fits most forks with 43-50mm tubes and are about 14" in length. Bottom of boot is 55mm-65mm. Comes with zip ties.
$34.95

Maico Wrist Pin and Bearing. Fits 1981 - 2003 250

Maico Wrist pin and bearing-fits 1981 - 2003 250
Specify year - as they are different .
$28.95

Maico 1982-97 250 / 490 Uni Filter New!

Fits single shock Maico 1982 - 1997.
$29.99

Maico Seal Kit For 1967 - 1972 Engine. 250 / 360 / 400 / 501. New!

New parts to keep your engine running like new!
$27.00

Maico Air Filter Cage By Twin-Air 1969 - 1979 250 / 440. New!

Great filter cage to replace that plastic warped cage.
$35.00

Maico Front Sprocket 1983 - 2003 250/440/490. Ultra lite 14T

New Maico Front sprocket 83-03 250 / 440 / 490 - ultra lite 14 Tooth. High quality part at a great price!
$25.00

Maico Engine Center Case - Clutch side. 250 - Fits 1971 - 1972. New!

New part with no bearings or seals.
Can supply bearings and seals, they are available.
$170.00

Maico, Montesa, Yamaha, Honda, KTM, Suzuki Fork Boots - Royal Blue

Perfect match for 84-87 Honda, Suzuki. Fork boots are narrower than other boots so they do not rub tire. Better quality fork boots that last longer and do not dry rot like cheaper Korean made boots. Bottom of boots are vented to relieve air build up. Fits most forks with 40-43mm tubes and are about 14" in length. Bottom of boot is 55mm-60mm. Comes with zip ties and hose clamps .
$34.95

Maico 1970 - 1979 250 / 250 / 440 Uni Filter. New!

Genuine Maico Filter from Uni Filter - not something that only fits like one.
Twin air filters are also available - limited stock!
$29.99

Maico Tank Decals. Fits 1969 - 1979 Tanks. New!

For fiberglass tanks. Price is for one set to do one tank. These decals are made from thick 12 mil - same as most decal companies. Exact replica of 1969 - 1974 graphics with correct Maico design. These are die-cut so they stay on the fiberglass tank and can be clear coated to keep them from wearing.
$39.95

Maico Bearing Set For 250 / 360 / 400 Square Barrel 1969 - 1972. New!

Set includes 2 high quality crank bearings, mainshaft bearing and output shaft bearing, and 2 crank seals.
$80.00

Maico Engine Case Bushings. New! #7847 for 1978 - 1982 Engines

For rear mount on 1978 - 1982 motors.
$23.95

Maico Throttle Cable Fits 1976 - 1979 Side Pull. New!

High quality cable fits years 1976 - 1979 whirlpool throttle or 314 Magura.
$42.99

Maico Primary Chain. Fits 1981 - 1982 250 / 400 / 450 #6803. New!

52 link 1 row chains - set of 2. New chains provide better engine response and reduced engine noise. Replace that worn primary chain for better performance.
$68.95

Maico Front Fender. Fits 1980 - 1983 250 / 400 / 440. New!

Very durable fender that will not fold up on impact. Color is perfect match for the Maico red used in 1980 - 1983.
$59.00

Maico Gasket Set. New! Fits 1973 - 1975 400 Engine

Kit comes with center gasket, clutch cover gasket, ignition cover gasket, exhaust gasket, head and base gaskets, shifter and kicker o-rings.
$59.99

Maico Wrist Pin and Bearing. Fits 1973 - 1986 400 / 490 Engine. New!

Maico Wrist Pin and Bearing. Fits 1973 - 1986 400 / 490 Engine. New!
$27.99

Maico Front Fender. Fits 1975 - 1978 250 / 400 / 440. New!

Very durable fender that will not fold up on impact. Glossy Finish.
$59.00

Maico 5 Speed Early 250 1976 AW Tranny Shift Forks And Pin. Used.

Shift pin is splined as are the forks, these came in the early AW 250 and 400 engines in 1976 and were changed mid year to update the motor. Used parts that are in excellent condition. Very rare parts that are no longer available even used.
$100.00

Maico Engine Seal Set for
1973 - 1975 250-440 Engine - New!

New Maico engine seal set for 1973 - 1975 250 - 440 engines.
Left side crank seal is a 2 spring ring seal that is very hard to find at this price, this seal alone sells for 16.00.
$22.00

Maico 400 Gasket Set - Fits 1978 - 1980 engines - New!

New gaskets, complete with exhaust manifold gasket. These gaskets are made to fit the cases without any problems.
High quality gasket that is made from paper, just like the Maico factory used.
Rebuild your engine using these high quality paper gaskets.
$59.80

Maico 400 Gasket Set - Fits 1981 Engines - New!

New gaskets, complete with exhaust manifold gasket.
These gaskets are made to fit the cases without any problems.
$59.80

Maico Reeds. Fits All Maico's With Reed Intake.

Boyesen Reeds for all Maico engines from 1981 - current models.
$35.95

Maico Fork Spring Set by Progressive Suspension - Fits 1980 - 1986 Forks. New!

New Maico fork spring set by Progressive Suspension. Fits 1980 - 1986 forks.
Made to work on small bumps and progressively firm up for the bigger hits. New Maico part that is hard to find.
They fit years 1980 - 1986 with the conventional forks.
Comes with springs, spacers and detailed instructions.
$103.50

Maico MC 250 Ring Fits Part #2067 New!

Maico 250cc ring for 1970 - 1980 engine with Mahle piston.
Part #2067 - no longer available from Maico.
$62.69

Maico MC 250 Ring Fits Part #2065 New!

Maico 250cc ring for 1970 - 1980 engine with Mahle piston.
Part #2065 - no longer available from Maico.
$62.69

Maico Rear Sprocket - Fits 1986 - 1997 250/490 54T. New!

Sprocket Specialist rear sprocket, made in the USA. Durable long lasting lightweight part.
These cost more than other sprockets because they are made out of the stronger 7075 - T6 aluminum.
Quality sprocket for 1986 - 1997 rear hub.
$80.70

Maico Clutch Bronze Bush 250/400/450 - 1969 - 1974. New!

New bushing to keep your clutch hub tight and keep your clutch working properly.
$23.00

Maico 81 490 Crank Bearing - Fits All 1976 - 1997 Motors

Brass inner cage - not the cheaper nylon or steel caged bearings others sell at inflated prices. These are what came in the Maico engines, why replace with inferior bearings.
Fits all 1976 - 1997 engines.
$60.00

Maico Rear Sprocket fits 1981 - 1985 250/490 52T. New!

Sprocket Specialist rear sprocket, made in the USA. Durable long lasting lightweight part.
These cost more than other sprockets because they are made out of the stronger 7075 - T6 aluminum.
Quality sprocket for 1981 - 1985 rear hub.
$80.70

Maico Mainshaft 1975 - 1977 Stamped 5. Good Used Condition

Maico mainshaft for 1975 - 1977 stamped 5.
250 motor, gears are in excellent condition.
Good used condition.
$59.99

Maico 250 Crank Bearing - Fits all 1976 - 1982 AW- Magnum, Mega 2, and Alpha Motors

Double row bearings with 12 balls per side - not the cheaper 8 ball bearings others sell at inflated prices.
Made for more stability and smoother rotation. These are what came in the Maico engines, why replace with inferior bearings.
Fits all 1976 - 1982 engines.
$57.00

Maico 81 490 Crank Bearing - Fits All 1976 - 1982 Motors

Double row bearings with 12 balls per side - not the cheaper 8 ball bearings others sell at inflated prices.
Made for more stability and smoother rotation. These are what came in the Maico engines, why replace with inferior bearings.
Fits all 1976 - 1982 engines.
$57.00

Maico Output Bearing - Fits 1983 - 1996 Engine #8121 - New!

Maico output bearing fits 1983 - 1996 engines #8121- new!
For 1983 - 1996 250 / 490 / 500 engines.
$51.30

 

Maico Engine Bearing Set - Tranny - 4 speed 1972 - 1975. New!

New Maico engine bearing set - tranny - 4 speed.
Fits the late 72 motors and all 1973 - 1975 motors.
Others sell the cheaper bearings at inflated prices - ours are high quality bearings - get more for your money.
Transmission bearings are top quality. All bearing are new stock.
$61.75

Maico Rear Sprocket fits 1981 - 1985 250/490 54T. New!

Sprocket Specialist rear sprocket, made in the USA. Durable long lasting lightweight part.
These cost more than other sprockets because they are made out of the stronger 7075 - T6 aluminum.
Quality sprocket for 1981 - 1985 rear hub.
$80.70

Maico 250 - Center Case Half #321. Fits 1975 1/2 - 1977. Used.

Maico 250 - center case half #321. Fits 1975 1/2 - 1977.
Left side engine case that has bearings in good usable condition.
Engine mount holes need to be repaired, all threads are in great condition.
Good usable part for a restoration.
Does not have brass shift plate guide.
$65.00